PCB

Understanding the JAMMA PCB and Edge Connector Pinout

First, here’s just a little history behind the significance of the acronym, JAMMA.

Back from the dark ages of the Golden Era of arcade video games (1984 and earlier), match manufacturers functioned in exclusive little domain names where they made game elements in a way that best served their own interests.

Thus they had their own proprietary circuit boards, power supplies, and repairs. There is no  pcb manufacturing usa of components between one manufacturer’s game cabinet and a game cabinet made by someone else.

As a result of japan, around 1985, all that exclusivity was soundly laid to break. And, things permanently altered.

The most significant and powerful of the new standards was the PCB standard pinout. Any match PCB complying with this particular pinout standard is exactly what we now call a JAMMA board. You’re able to see the JAMMA logo delivered near the pin-out section of a JAMMA board. Almost all JAMMA boards sport that logo.

The wiring which connects the match components – monitor, power supply, control panel, speaker, etc. – into the PCB is known as a JAMMA wiring harness. The wiring harness 56-pin edge connector seats onto the PCB’s pin-out hands on.

There are many JAMMA terms that we’ve come to hear and also use often – JAMMA board, JAMMA harness, JAMMA edge connector, JAMMA cabinet, and so on. At the root of their meaning isn’t anything more than the notion of PCB interchangeability between cabinets of different manufacturing companies.

And, it is that the JAMMA standard PCB pin-out (charted below) that has made it possible.

The following JAMMA pinout chart is essentially a map of the JAMMA wiring harness 56-pin edge connector. When correctly seated on the PCB, the connectors of the edge connector will align with the pin out fingers of this PCB, and also your game will play.

After you tire of a game, you can plug-and-play the JAMMA PCB for your next favorite game. Plug and play simply method to detach the border connector from 1 PCB, and plug it onto the other PCB.

And, that method of jelqing can carry on , because there are now 1000’s of JAMMA match PCBs which you can play on your JAMMA cabinet. Thankyou, Japan.

JAMMA PINOUT CHART

Solder Negative – Alpha Characters – 28 Pins – Az, A F

The solder side would be the bottom side of the PCB. It’s the side at which the soldered connections of parts are all vulnerable to see. Few, if any, all parts are situated on the other hand. The solder side pinout is identified with alpha characters.

The parts side would be the top side of the PCB. It’s the side where the components are . The parts side pin-out is identified with numerical characters.

Usually, that the PCB is printed along with the edge connector is merged with both alpha and numeric characters.

GROUND – 1

GROUND – B, 2

+5VDC – C, 3

+5VDC – D, 4

-5VDC – E, 5

COIN COUNTER Number 2 – J

COIN COUNTER #1 – 8

Lockout COIL Number 2 – K

Lockout COIL No 1 – 9

SPEAKER (-) – L

SPEAKER (+) – 10

N/C – M

N/C – 11

VIDEO GREEN – N

VIDEO RED – 12

VIDEO SYNC – N

VIDEO BLUE – 1-3

Support SWITCH – Frazee

VIDEO GROUND – 14

TEST SWITCH – 1-5

COIN SWITCH #2 – T

COIN SWITCH Number 1 – 16

PLAYER 2 – START – U

PLAYER 1 – START – 17

PLAYER 2 – UP – V

PLAYER 1 – UP – 18

PLAYER 2 – DOWN – W

PLAYER 1 – DOWN – 1 9

PLAYER two – LEFT – X

PLAYER 1 – LEFT – 20

PLAYER 2 – RIGHT – Y

PLAYER Inch – RIGHT – 21

PLAYER two – BUTTON Inch – Z

PLAYER 1 – BUTTON 1 – 22

PLAYER two – BUTTON two – a

PLAYER Inch – BUTTON two – 2 3

PLAYER 2 – BUTTON 3 – b

PLAYER 1 – BUTTON 3 – 2 4

N/C – c all

N/C – 25

N/C – d

N/C – 26

GROUND – e

GROUND – 27

GROUND -f

GROUND – 28

N/C – No connection.

Key Slot – A keyed slot that aligns with a leave-out at the pinout section of this PCB.

This safety feature is provided to ensure the Power Section seats at the proper end of the pin out section. In the event the border connector has been reversed, and also the Power Section is seated at the alternative or incorrect ending, irreparable damaged can occur to the PCB.

When the key has been taken out of the edge connector, then indicate the connector as to the”Parts Side” to help ensure appropriate chairs.

Power Section – Pins A-F, 16, e, f, 27, 28

Video Section – Pins N, P, 1315

Coin Section – Pins J, K, T, 8, 9, 16

Controller (Joystick) Section – Pins V-Y, 18-21

Pushbutton Switch Section – Pins Z-B, 2224